10 guage steel (50 grade) on side construction

8 guage steel floor with radius corners

25" side height with brackets for side board extensions

Fully boxed dirt-shedding top rail

45° sloped rub rail

Three vertical boxed braces per side

Radius front corner posts with recessed clearance lights on lower posts

Full height corner posts, 11.25 wide and 4 inches deep

Front has triple bend top rail horizontal brace with seamless front panel

7" structural channel long sills and 4" structural channel cross sills on 12" centers

Recessed shock resistant rubber mounted, FMVSS 108 clearance lights, also three cluster lights provided in lower apron

New oval-shaped stop/turn/tail lights in upper rear corner posts with side clearance lights on lower post

Valspar 2 part epoxy gray primer

All appearance corners have radius bends

Sloped 1/2 cab shield

Optional 3/4 cab shield

Sloped 10° inward and recessed flush with rear face of corner posts

34" end height, four-way tailgate with adjustable rod on trip lever

Fully boxed brace frame

10- guage steel (50 grade) construction

Reinforced with two tapered vertical braces and one tapered horizontal brace

Angle iron reinforced decking at rear, ensures longer lasting gate seal

Heavy duty 1.25" lower pin on latch mechanism and upper pivot arms are of .75" plate

Grease fittings on upper pivot arms

Equipped with spreader chains and banjo eye chain holders in corner posts

Optional - Coal chute door and spreader apron